Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : Tail light

Jeep Wrangler - Tail light

Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the rear light in the Jeep Wrangler?
In this tutorial we can see how to disassemble and replace the rear light in the Jeep Wrangler JK, a very simple and fast operation. To do this we will only …read all…
Posted on 11 October 2022 by ScegliAuto
Jeep Wrangler (2018-2024 / MK 4, JL)
How to replace the rear lights in the Jeep Wrangler?
In this tutorial we can see how to remove and then replace the rear lights in the Jeep Wrangler, a very simple operation. First of all, make sure that the key …read all…
Posted on 6 July 2022 by ScegliAuto
Jeep Wrangler (2018-2024 / MK 4, JL)
How to remove the rear light of the Jeep Wrangler?
Removing the rear light of the Jeep Wrangler is a very simple operation, let's see how to proceed in this tutorial. We need a plastic spatula to remove the …read all…
Posted on 25 March 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Replacing the rear light on Jeep Wrangler
Removing and replacing a rear light on Jeep Wrangler is really easy and now we are showing it to you. To do this, in fact, it is sufficient to unscrew the four …read all…
Posted on 6 March 2024 by ScegliAuto
Airbags (1) Alternator (1) Loudspeaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Gearbox (3) Spark plugs (1) Soft top (1) Bodywork (2) Glove box (1) Key (17) Timing belt (3) V-belt (1) -board computer (11) Checks and maintenance (26) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Headlight (9) Tail light (4) Air filter (8) Cabin air filter (8) Diesel filter (1) Oil filter (4) Hand brake (1) Grille (3) Accessory Kit (3) Light bulb (3) Side turn signal light bulb (4) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (1) License plate light (2) Third brake light (2) Handle (1) Engine (1) Starter motor (3) Gear oil (1) Brake oil (2) Engine oil (9) Power steering oil (1) Door panel (3) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (2) Gear Shift Knob (6) Door (8) Instrument cluster (12) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (9) Seat (5) Drive shaft (2) Crankshaft RPM sensor (1) Outside rearview mirror (6) Drums and shoes (1) Windscreen wipers (5) Thermostat (3) Transmission (3) EGR valve (1) Interior blower (1) Steering wheel (3)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos