Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlamp of the Jeep Wrangler?

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026
Part: Tail light

Removing the rear headlamp of the Jeep Wrangler is a straightforward task. You will need a plastic trim removal tool, a Torx T40 key, or alternatively a 10 mm socket. First, open the small upper access panel using the trim tool. Next, unscrew the white plastic bolt. Grip the headlamp and disengage it from the bodywork. Finally, disconnect the connector by unlocking the red clip, as shown in the video. Replacing the part is equally simple; just follow the same procedure in reverse.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Rear Headlamp Bulbs on a Jeep Wrangler
Replace the Rear Headlamp Bulbs on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) In this tutorial, you will learn how to remove and replace the rear headlamp bulbs on a Jeep Wrangler in simple, quick steps. First, move to the rear…
Replacing the Rear Light on a Jeep Wrangler
Replacing the Rear Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Removing and replacing a rear light on a Jeep Wrangler is really easy, and we will show you how. To do this, simply undo the four screws located at t…
How do you remove the rear taillight of the Jeep Wrangler?
How do you remove the rear taillight of the Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) In order to remove the rear light of the Jeep Wrangler, you need to open the rear door to access the side of the trunk where the light is located. He…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos