Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Body

In this video, we will see how to change a headlight bulb on a Jeep Wrangler: on this vehicle, it is a bit more complicated than on a regular car, but it is still a possible operation. First, we need to remove the front grille, by unscrewing the holding clips that are easily identified by opening the hood, and that can be seen well from above the grille. Once these are removed, we need to gently but firmly pull on the bottom part, in order to remove the lower fittings. The parking lights will remain attached to the grille; be careful not to damage them. Now there are four screws to remove the headlight ring, and the headlight remains in place only thanks to the electrical connector: disconnect it, turn it counterclockwise and pull out the bulb to be replaced. Replace it and put everything back in place.

Posted on 14 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulb on a Jeep Wrangler?
How to replace the rear light bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the rear light bulb on a Jeep Wrangler, unscrew the four screws that secure the light, allowing it to be removed from its housing. Once re…
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the front headlamp bulb on a Jeep Wrangler, use a screwdriver to loosen the screws securing the front grille located just above the bumper…
How to Replace the Front Headlight Bulb in a Jeep Wrangler?
How to Replace the Front Headlight Bulb in a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In this video, you can see how to replace the front headlight bulb in the Jeep Wrangler, a very simple and quick operation. First, remove the front g…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos