Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How to replace the rear lights in the Jeep Wrangler?

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler JL, MK 4 - Years 2018-2024
Part: Tail light
Operation: How to replace the rear lights in the Jeep Wrangler?

In this tutorial we can see how to remove and then replace the rear lights in the Jeep Wrangler, a very simple operation. First of all, make sure that the key is not inserted, in order to operate safely, then open the hatch, remove the panel on the back of the lighthouse to be removed and unscrew the plastic bolt with the supplied key. Once this is done, we extract the headlight from the body by pulling it towards us, disconnect the power connector and proceed with the replacement of the damaged element, whether it is a bulb or the headlight itself.


Posted on 6 July 2022 by ScegliAuto



How to replace front headlights on Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Today, in this short and simple guide, let's see the step-by-step instructions for disassembling and replacing the front lights of the Jeep Wrangler.
How to remove the grille of a Jeep Wrangler JK
Jeep Wrangler (2007-2018 / MK 3, JK) Disassembling the grille of a Jeep Wrangler, JK model, is very simple. You just need to open the front hood and remove the fixing screws using a flat
Replacing the rear light on Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Removing and replacing a rear light on Jeep Wrangler is really easy and now we are showing it to you. To do this, in fact, it is sufficient to unscre

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos