Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Oil Level on a Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Engine oil

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Engine Oil Level on a Jeep Renegade 2.4 Multiair
How to Check the Engine Oil Level on a Jeep Renegade 2.4 Multiair
Jeep Renegade (2014-2026 / 520, MK 1, BU) Below are the steps to check the engine oil level on a Jeep Renegade 2.4 Multiair and top up if necessary. First, open the bonnet and pull out the en…
Engine Oil and Oil Filter Replacement on a Jeep Renegade
Engine Oil and Oil Filter Replacement on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Jeep Renegade during a regular maintenance service. First, o…
How to Reset the Tyre Pressure Light on the Jeep Renegade
How to Reset the Tyre Pressure Light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Follow these steps to reset the tyre pressure light on the Jeep Renegade; before performing the reset, ensure that all four tyres are at the correct …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos