Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check AdBlue Level in the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: AdBlue warning light

In today's video, check how to verify the AdBlue fluid level in the Jeep Renegade. This tutorial also applies to other models from the former FCA group, equipped with the same diesel engine. First, start your vehicle. Go to the instrument cluster and navigate using the appropriate arrows. Select the corresponding option by scrolling through the vehicle settings to the second page. Once done, you can check the level and top it up if necessary. You can then finish the job and switch off your vehicle.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Engine Oil Level on a Jeep Renegade 2.4 Multiair
How to Check the Engine Oil Level on a Jeep Renegade 2.4 Multiair
Jeep Renegade (2014-2026 / 520, MK 1, BU) Below are the steps to check the engine oil level on a Jeep Renegade 2.4 Multiair and top up if necessary. First, open the bonnet and pull out the en…
How to Check the Oil Level on a Jeep Renegade?
How to Check the Oil Level on a Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the …
How to Reset the Service Light on a Jeep Renegade?
How to Reset the Service Light on a Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To reset the Service light on a Jeep Renegade, turn the ignition key to power on the instrument cluster and check for the maintenance light. Press an…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos