Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Engine Oil Level on a Jeep Renegade 2.4 Multiair

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Checks and maintenance

Below are the steps to check the engine oil level on a Jeep Renegade 2.4 Multiair and top up if necessary. First, open the bonnet and pull out the engine oil dipstick located to the left of the plastic partition; use a dry cloth to clean it. Reinsert the dipstick and remove it again to check the actual engine oil level; if it is at the minimum mark, top up until you reach the maximum level mark, being careful not to overfill.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the serpentine belt of the Jeep Renegade 2.4 MultiAir
Replacement of the serpentine belt of the Jeep Renegade 2.4 MultiAir
Jeep Renegade (2014-2026 / 520, MK 1, BU) Below we will see the main instructions on how to disassemble and replace the serpentine belt of the Jeep Renegade 2.4 MultiAir. First, lift the vehi…
How to Change the Engine Oil and Oil Filter on a Jeep Renegade 2.4 MultiAir
How to Change the Engine Oil and Oil Filter on a Jeep Renegade 2.4 MultiAir
Jeep Renegade (2014-2021 / ) In this guide, you will learn how to perform the routine maintenance service for changing the oil and oil filter on a Jeep Renegade 2.4 MultiAir, as …
How to Reset the Oil Change Light on a Jeep Renegade?
How to Reset the Oil Change Light on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) Resetting the oil change light on a Jeep Renegade is very simple. Follow this procedure only after changing the oil and the corresponding filter. To …

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - What does the "side distance warning not available" message mean in the Jeep Renegade? Read answer
    • Jeep Renegade 2014-2026 - How to deactivate the Start / Stop in the Jeep Renegade? Read answer
    • Jeep Renegade 2014-2026 - What does the Jeep Renegade "Start & Stop not available" mean? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos