Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Engine oil

Video tutorial

To replace the engine oil on a Jeep Renegade, it is advisable to bring the engine to operating temperature, then turn it off and safely lift the vehicle. After removing the oil filler cap, place a container under the sump and unscrew the drain plug to allow the used oil to completely drain out. Once drained, reinstall the plug with the appropriate gasket and proceed to replace the oil filter, lubricating the new gasket with a thin layer of new oil before installation.

Next, fill the engine with the quantity and specification of oil recommended by the manufacturer. Once filling is complete, start the engine for a few seconds, check for leaks, and verify the level with the dipstick or monitoring system, topping up as necessary to reach the correct level.


Posted on 16 July 2026 by ScegliAuto


Related tutorials

How to Change Oil on a Jeep Renegade
How to Change Oil on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Here’s how to change the oil and filter on a Jeep Renegade. Lift the car on a column lift or jack and use a socket wrench (with the appropriate socke…
How to Change the Automatic Gearbox Oil on a Jeep Renegade
How to Change the Automatic Gearbox Oil on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today, see how to change the automatic gearbox oil on a Jeep Renegade; the same procedure can also be used on a Jeep Compass. First, lift the vehicle…
Engine Oil Change for Jeep Renegade
Engine Oil Change for Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video, you will see how to change the engine oil of the famous Jeep Renegade. First, lift the vehicle using a lift or (if you don’t have one)…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos