Do it yourself
Frequently asked questions about cars and motorcycles

How to Change Oil on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Engine oil

Here’s how to change the oil and filter on a Jeep Renegade. Lift the car on a column lift or jack and use a socket wrench (with the appropriate socket) to unscrew the bolt located under the oil sump, allowing the oil to drain into a container for future disposal. After allowing all the oil to drain, re-tighten the sump bolt. In the engine compartment, unscrew the filter using a socket wrench (screw the new filter in with the filter holder in the engine compartment). Finally, top up the engine with new oil following the manufacturer's recommendations.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Renegade (2014-2026 / 520, MK 1, BU) Start by ensuring that the service has been completed, then sit in the driver's seat of your Jeep Renegade. Once seated, press the ignition button on…
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button once, activating the instrument…
Jeep Renegade (2014-2026 / 520, MK 1, BU) Changing oil on a Jeep Renegade? Here’s how to drain the engine oil on a Jeep Renegade. Open the car door and pull up the engine compartment release …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos