Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change for Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Engine oil

In this video, you will see how to change the engine oil of the famous Jeep Renegade. First, lift the vehicle using a lift or (if you don’t have one) with a jack and remove the cover that conceals the engine oil drain plug. Allow all the residual oil to drain completely (leave it for more than half an hour): after that, screw the plug back in, reattach the cover, and proceed to pour the new oil into the engine. It is very important to replace the oil filter, especially if you are using a type of mineral oil that may be less refined compared to synthetic oil. Perform this type of maintenance every 12,500 miles maximum.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Change on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Changing oil on a Jeep Renegade? Here’s how to drain the engine oil on a Jeep Renegade. Open the car door and pull up the engine compartment release …
How to Check the Engine Oil Level on a Jeep Renegade 2.4 Multiair
How to Check the Engine Oil Level on a Jeep Renegade 2.4 Multiair
Jeep Renegade (2014-2026 / 520, MK 1, BU) Below are the steps to check the engine oil level on a Jeep Renegade 2.4 Multiair and top up if necessary. First, open the bonnet and pull out the en…
How to Reset the Oil Light on a Jeep Renegade
How to Reset the Oil Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you start, sit in the driver's seat of your Jeep Renegade. Begin by pressing the vehicle's ignition button once to activate the instrument clu…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos