Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil in a Jeep Renegade?

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Engine oil

Video tutorial

In this tutorial, see how to replace the engine oil in a Jeep Renegade, a very simple and quick operation. First, ensure that the engine is cool enough, then lift the front of the vehicle, taking all necessary safety precautions.

Next, unscrew the filler cap, locate the drain plug, and unscrew it using a 13 mm socket wrench. Now, simply unscrew the old filter, tighten both the replacement and the plug, and add the necessary amount of oil.


Posted on 27 September 2026 by ScegliAuto


Related tutorials

Oil Change on a Jeep Renegade
Oil Change on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Changing the oil and filter on a Jeep Renegade? Here’s how to remove it from the engine bay. Lift the bonnet and secure it, then use a strap wrench t…
Engine Oil Change on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Changing oil on a Jeep Renegade? Here’s how to drain the engine oil on a Jeep Renegade. Open the car door and pull up the engine compartment release …
Engine Oil and Oil Filter Replacement on a Jeep Renegade
Engine Oil and Oil Filter Replacement on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Jeep Renegade during a regular maintenance service. First, o…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos