Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Engine oil

This video is currently unavailable

Changing oil on a Jeep Renegade? Here’s how to drain the engine oil on a Jeep Renegade. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located.

Remove the worn oil filter and install a new one. Lift the car on a jack and unscrew the bolt of the oil sump; allow the fluid to drain into a container. Test the engine operation after topping up with new oil.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Start by ensuring that the service has been completed, then sit in the driver's seat of your Jeep Renegade. Once seated, press the ignition button on…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button once, activating the instrument…
Engine Oil Change for Jeep Renegade
Engine Oil Change for Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video tutorial, you will learn how to change the engine oil of a Jeep Renegade, an operation that should be performed whenever routine mainte…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos