Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Renegade
    4. : How to remove the rear door panel of the Jeep Renegade

Jeep Renegade - Video tutorial

Model: Jeep Renegade MK 1, 520, BU - Years 2014-2023
Part: Door
Operation: How to remove the rear door panel of the Jeep Renegade

To remove the rear panel of the Jeep Renegade you will need plastic spatulas, so as not to damage the upholstery. The first thing to do is to remove the plastic protection from the screws of the handles, in order to be able to unscrew them. Together with the screw of the lower handle we will also find the electric plug of the window lifter, so let's disconnect it. Once you have removed this screw and this connector, you can begin to move the plastics from the bodywork starting from the bottom. Then remove the top pillar of the panel, which is separated from the rest and which is held to the body by pins.


Posted on 1 September 2022 by ScegliAuto

Other guides that may interest you

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos