Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Door Panel on the Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Door trim panel

To replace the rear door panel on the Jeep Renegade, you need to unscrew the screw located near the window switch: this can now be removed from its housing by unscrewing the screw and disconnecting the corresponding connector. At this point, you can unscrew the other screws securing the panel, located at its central lower part, on the left side, and at the internal handle location: when the panel is completely free, you can detach it from the door and replace it with a new spare part.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Door Panel on the Jeep Renegade
How to Remove and Replace the Door Panel on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today's guide will show you how to remove and replace the front door panel of the Jeep Renegade. First, open the door and start unscrewing all the fi…
How to Replace the Door Lock on the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the door lock on the Jeep Renegade, open the door to access the side bolt securing the lock. Once the bolt is completely removed, you can …
How to remove the outer handle of the rear door of the Jeep Renegade
How to remove the outer handle of the rear door of the Jeep Renegade
Jeep Renegade (2014-2023 / ) In a few simple steps, we will see the process of disassembling and replacing the external handle of the rear door of the Jeep Renegade. First, we op…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos