Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the outer handle of the rear door of the Jeep Renegade

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Handle

Video tutorial

In a few simple steps, we will see the process of disassembling and replacing the external handle of the rear door of the Jeep Renegade. First, we open the rear door of the car and begin to unscrew the small fixing screw of the handle that we find inside the side hole; then we remove the plastic cap of the handle and remove the entire handle, as shown in the video.

At this point, we install the new external door handle, properly securing it with the side screw; finally, we remove the plastic cap of the handle!


Posted on 27 March 2025 by ScegliAuto


Related tutorials

How to Remove the Door Handle on a Jeep Renegade
How to Remove the Door Handle on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Follow these steps to remove and install the external handle on the door of a Jeep Renegade. Insert a suitable screwdriver into the slot on the door …
How to replace the external door handle of the Jeep Renegade?
How to replace the external door handle of the Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the external door handle of the Jeep Renegade, open the door to access the screw located on its side. Once this screw is fully loosened, y…
How to Remove and Replace the Door Panel on the Jeep Renegade
How to Remove and Replace the Door Panel on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today's guide will show you how to remove and replace the front door panel of the Jeep Renegade. First, open the door and start unscrewing all the fi…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos