Do it yourself
Frequently asked questions about cars and motorcycles

Engine Oil and Oil Filter Replacement on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Engine oil

In this video tutorial, you will learn how to replace the engine oil and oil filter on a Jeep Renegade during a regular maintenance service. First, open the bonnet and unscrew the filler cap; lift the vehicle to unscrew the oil drain bolt, allowing the oil to drain into a container for about ten minutes. Next, unscrew and remove the oil filter cartridge using a socket wrench, replacing it with a new one; finally, pour in the new engine oil, checking the oil level with the dipstick!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Renegade (2014-2026 / 520, MK 1, BU) Changing the oil and filter on a Jeep Renegade? Here’s how to remove it from the engine bay. Lift the bonnet and secure it, then use a strap wrench t…
Jeep Renegade (2014-2026 / 520, MK 1, BU) Changing oil on a Jeep Renegade? Here’s how to drain the engine oil on a Jeep Renegade. Open the car door and pull up the engine compartment release …
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the oil filter on a Jeep Renegade, follow these steps. Lift the car on a jack and undo the bolt of the oil sump; let the fluid drain into …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos