Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Filter Replacement on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Oil filter

To replace the oil filter on a Jeep Renegade, follow these steps. Lift the car on a jack and undo the bolt of the oil sump; let the fluid drain into a container. Use a strap wrench to unscrew the large securing bolt of the container cap where the oil filter is located. Open the car's door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Refill the engine with new oil. Lower and close the front bonnet. Start the car.

Updated on 16 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Oil Change on a Jeep Renegade
Oil Change on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Changing the oil and filter on a Jeep Renegade? Here’s how to remove it from the engine bay. Lift the bonnet and secure it, then use a strap wrench t…
Engine Oil and Oil Filter Replacement on a Jeep Renegade
Engine Oil and Oil Filter Replacement on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Jeep Renegade during a regular maintenance service. First, o…
Engine Oil Change on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Changing oil on a Jeep Renegade? Here’s how to drain the engine oil on a Jeep Renegade. Open the car door and pull up the engine compartment release …

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos