Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Engine oil

To change the engine oil on a Jeep Renegade, lift the vehicle to access components in the lower part of the engine compartment: here you will find the oil drain plug, which must be unscrewed to collect all the used oil in a suitably positioned container. Once all the oil has drained out, you can remove the filter from its housing and replace it with a new one. After replacing the filter, top up the oil from inside the engine block.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Automatic Gearbox Oil on a Jeep Renegade
How to Change the Automatic Gearbox Oil on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today, see how to change the automatic gearbox oil on a Jeep Renegade; the same procedure can also be used on a Jeep Compass. First, lift the vehicle…
Oil Change Reset Procedure for the Jeep Renegade
Oil Change Reset Procedure for the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, you will see how to reset the oil change light after performing an oil change on a Jeep Renegade. First, if the vehicle is on, turn it…
Engine Oil Change for Jeep Renegade
Engine Oil Change for Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, you will learn how to change the engine oil of a Jeep Renegade, an operation that should be performed whenever routine mainte…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos