Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the serpentine belt of the Jeep Renegade 2.4 MultiAir

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: V-belt

Video tutorial

Below we will see the main instructions on how to disassemble and replace the serpentine belt of the Jeep Renegade 2.4 MultiAir. First, lift the vehicle and start disassembling and removing the right front wheel and the wheel arch, thus accessing the serpentine belt; loosen the tensioner to remove the serpentine belt from the various pulleys, as shown in the video.

At this point, install the new original serpentine belt in the correct direction, inserting it between the various pulleys; slowly turn the engine to ensure its correct insertion!


Posted on 19 May 2025 by ScegliAuto


Related tutorials

How to replace the serpentine belt in the Jeep Renegade?
How to replace the serpentine belt in the Jeep Renegade?
Jeep Renegade (2014-2023 / ) In this tutorial we can see how to replace the serpentine belt in the Jeep Renegade, an extremely simple and quick operation. First of all, make sure…
An Important Thing to Know About 1.4 Multiair Engines
An Important Thing to Know About 1.4 Multiair Engines
Jeep Renegade (2014-2026 / MK 1, BU, 520) This video highlights a very important aspect of 1.4 Multiair engines, represented here by a Jeep Renegade. This issue emerged during the COVID lockd…
How to Change the Engine Oil and Oil Filter on a Jeep Renegade 2.4 MultiAir
How to Change the Engine Oil and Oil Filter on a Jeep Renegade 2.4 MultiAir
Jeep Renegade (2014-2021 / ) In this guide, you will learn how to perform the routine maintenance service for changing the oil and oil filter on a Jeep Renegade 2.4 MultiAir, as …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos