Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the serpentine belt in the Jeep Renegade?

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: V-belt

Video tutorial

In this tutorial we can see how to replace the serpentine belt in the Jeep Renegade, an extremely simple and quick operation. First of all, make sure that the engine is cool enough, then lift the front right side taking all the necessary safety measures.

Next, remove both the wheel and the wheel arch, grip the tensioner with a 16mm wrench and move it outwards to loosen the tension. At this point, we can remove the old belt, position the replacement following the correct pattern, and reassemble everything.


Posted on 5 February 2025 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Jeep Renegade 2.0 Multijet
Replacing the Timing Belt on the Jeep Renegade 2.0 Multijet
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today's main steps will show you how to remove and replace the timing belt on the Jeep Renegade 2.0 Multijet. First, open the engine bonnet and remov…
How to Replace the Timing Belt on a Jeep Renegade 2.0 Multijet?
How to Replace the Timing Belt on a Jeep Renegade 2.0 Multijet?
Jeep Renegade (2014-2026 / MK 1, BU, 520) The video here briefly shows what is required to replace the timing belt on the Jeep Renegade 2.0 Multijet and where in the vehicle the work should b…
Replacement of the serpentine belt of the Jeep Renegade 2.4 MultiAir
Replacement of the serpentine belt of the Jeep Renegade 2.4 MultiAir
Jeep Renegade (2014-2026 / MK 1, BU, 520) Below we will see the main instructions on how to disassemble and replace the serpentine belt of the Jeep Renegade 2.4 MultiAir. First, lift the vehi…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos