Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on the Jeep Renegade 2.0 Multijet

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Timing belt

Video tutorial

Today's main steps will show you how to remove and replace the timing belt on the Jeep Renegade 2.0 Multijet. First, open the engine bonnet and remove the upper cover and engine mount; then lift the vehicle and remove the crankshaft pulley and the V-belt, taking off the timing cover, as shown in the video.

At this point, take the necessary references for replacing the timing belt, installing the new original one, and following the video tutorial to the end!


Updated on 13 September 2026 by ScegliAuto


Related tutorials

How to replace the timing belt of the Jeep Renegade 2.0 Multijet
How to replace the timing belt of the Jeep Renegade 2.0 Multijet
Jeep Renegade (2014-2026 / MK 1, BU, 520) The main steps illustrated in this guide will show us how to disassemble and replace the timing belt of the Jeep Renegade 2.0 Multijet. First, we lif…
How to Replace the Timing Belt on a Jeep Renegade 2.0 Multijet?
How to Replace the Timing Belt on a Jeep Renegade 2.0 Multijet?
Jeep Renegade (2014-2026 / MK 1, BU, 520) The video here briefly shows what is required to replace the timing belt on the Jeep Renegade 2.0 Multijet and where in the vehicle the work should b…
How to Replace the Timing Belt on a Jeep Renegade?
How to Replace the Timing Belt on a Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the timing belt on the Jeep Renegade, open the bonnet to access the components in the engine bay. On the left side, locate the plastic cov…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - What is the mileage to replace the timing belt on the Jeep Renegade? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos