Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Jeep Renegade 2.0 Multijet

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Timing belt

The main steps illustrated in this guide will show us how to disassemble and replace the timing belt of the Jeep Renegade 2.0 Multijet. First, we lift the vehicle and start by removing the front right wheel and the fender; then we remove the V-belt and disassemble the crankshaft pulley, then remove the distribution cover. At this point, we remove the intake hose and the engine support, accessing the timing belt; we take the necessary references for the replacement of the belt, installing the original one, also replacing the water pump kit if necessary.

Posted on 17 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on the Jeep Renegade 2.0 Multijet
Replacing the Timing Belt on the Jeep Renegade 2.0 Multijet
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today's main steps will show you how to remove and replace the timing belt on the Jeep Renegade 2.0 Multijet. First, open the engine bonnet and remov…
How do you replace the timing belt in the Jeep Renegade 2.0 Multijet?
How do you replace the timing belt in the Jeep Renegade 2.0 Multijet?
Jeep Renegade (2014-2026 / 520, MK 1, BU) The video presented here briefly shows what needs to be replaced in the Jeep Renegade 2.0 Multijet, approximately the timing belt and at which point …
How to Replace the Timing Belt on a Jeep Renegade?
How to Replace the Timing Belt on a Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the timing belt on the Jeep Renegade, open the bonnet to access the components in the engine bay. On the left side, locate the plastic cov…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - What is the mileage to replace the timing belt on the Jeep Renegade? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos