Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump in the Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Pump

In today's tutorial, you will see the steps to replace the water pump in the Jeep Compass. Before starting, it is advisable to wait until the engine components have cooled down. At this point, you can proceed by first removing the hose connected to the water pump, taking care of any coolant leaks. Then, loosen the bolts and remove the old water pump. Next, remove the old gasket and proceed to install the new water pump. Before this step, it is important to ensure that the mounting surface is clean.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Jeep Compass 2.4
How to Replace the Fuel Pump on a Jeep Compass 2.4
Jeep Compass (2006-2016 / MK 1, MK 49) Today's instructions will show you the steps to remove and replace the fuel pump on a Jeep Compass 2.4. First, open the rear doors and start by remov…
Replacement of the timing belt of the Jeep Compass Multijet
Replacement of the timing belt of the Jeep Compass Multijet
Jeep Compass (2016-2025 / 552, MK 2) Let's discover the information that will allow us to dismantle and replace the timing belt of the Jeep Compass, with a diesel engine (Multijet). To a…
Guide to replacing the timing belt of the Jeep Compass 1.4 MultiAir
Guide to replacing the timing belt of the Jeep Compass 1.4 MultiAir
Jeep Compass (2016-2025 / 552, MK 2) In this guide, we will see the information related to the disassembly and replacement of the timing belt of the Jeep Compass 1.4 MultiAir. In order t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos