Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to disassemble the water pump of the Jeep Cherokee

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 2, XJ - Years 1984-2001
Part: Pump
Operation: How to disassemble the water pump of the Jeep Cherokee

In today's video tutorial we will see how to disassemble the water pump of the Jeep Cherokee, following the instructions below. First we open the engine hood and start by unscrewing the upper screws of the radiator fan, disconnecting the electrical connector to remove it; after that we are going to remove the service belt, as shown in the video. At this point we unscrew the screws of our coolant pump, removing it together with the pulley; so let's replace it with the new one, with the original spare part, following the video tutorial to the end!


Posted on 12 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos