Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Mount of the Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine mount

See other generations:
Video tutorial

Today's main instructions will guide you in removing and replacing the engine mount of the transmission (driver's side) of the Jeep Compass. First, open the bonnet and begin by removing the air filter box, disconnecting the intake hose; then disconnect and remove the battery.

Now unscrew the bolts of the engine mount to remove it, moving the wiring out of the way; then install the new original engine mount, securing it properly to the top of the transmission. Finally, reassemble the battery and the air filter box!


Posted on 2 February 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on a Jeep Compass MK2
Replacing the Air Filter on a Jeep Compass MK2
Jeep Compass (2016-2025 / 552, MK 2) To replace the air filter that feeds the engine of the Jeep Compass, open the front bonnet, locate the air filter on the driver's side, and use a 10 …
How to Replace the Front Headlight on a Jeep Compass
How to Replace the Front Headlight on a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Before starting, open the front bonnet of your Jeep Compass. Begin by disassembling and removing the front bumper by unscrewing the fastening screws …
Where to Find and How to Access the Cigarette Lighter Fuse on a Jeep Compass?
Where to Find and How to Access the Cigarette Lighter Fuse on a Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) The cigarette lighter fuse on your Jeep Compass is located inside the fuse box. The fuse box is situated within the engine bay, near the battery. To …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos