Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to exit the "Park" configuration on a Jeep Compass

Model: Jeep Compass MK 3, J4U - Years: 2026
Part: Transmission

See other generations:
Video tutorial

On the 2025 Jeep Compass, when the "Park" mode is engaged, the display shows "Brake On" and the vehicle does not move even when shifting to Drive. This occurs because the system requires manual confirmation.

To exit Park mode, press and hold the "Park" button (or the handbrake button) for a few seconds. The "P" (Park) button is located next to or behind the selector, where there is a button with the letter "P" or an icon resembling a handbrake (a "P" with a circle around it). It can also be a manual button, often round or square with the handbrake symbol (a "P" with two lines underneath).

The system will release the brake, and the display will indicate that Park mode is deactivated. At that point, you can shift to Drive and proceed.

Using this procedure, you can start without damaging the vehicle in any way.


Posted on 31 August 2026 by ScegliAuto


Related tutorials

How to Activate and Deactivate Parking Sensors on the Jeep Compass
How to Activate and Deactivate Parking Sensors on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this short and simple guide, you will learn how to activate or deactivate the parking sensors on the 2018 Jeep Compass, second series, by followin…
How to Activate or Deactivate Parking Sensors or Park Assist on the Jeep Compass
How to Activate or Deactivate Parking Sensors or Park Assist on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) This guide outlines the steps to activate or deactivate the parking sensors and park assist on the Jeep Compass. First, get into the vehicle and navi…
How to enable and disable the parking assistance sensor on the Jeep Compass II
How to enable and disable the parking assistance sensor on the Jeep Compass II
Jeep Compass (2016-2025 / 552, MK 2) In this video we can see how to enable and disable the parking assistance sensor on a Jeep Compass II: on the central console we find a button with t…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos