Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate and Deactivate Parking Sensors on the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Checks and maintenance

In this short and simple guide, you will learn how to activate or deactivate the parking sensors on the 2018 Jeep Compass, second series, by following the instructions below. First, get into the vehicle and start the engine; then, press the parking sensor button located on the central console: if the light comes on, you will activate them, otherwise, you will deactivate them. The instrument cluster will display a message indicating the sensors are activated, showing the rear view from the corresponding camera whenever you perform a parking manoeuvre.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Activate or Deactivate Parking Sensors or Park Assist on the Jeep Compass
How to Activate or Deactivate Parking Sensors or Park Assist on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) This guide outlines the steps to activate or deactivate the parking sensors and park assist on the Jeep Compass. First, get into the vehicle and navi…
How to Activate or Deactivate the Handbrake on the Jeep Compass
How to Activate or Deactivate the Handbrake on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) This guide will show you how to safely activate or deactivate the handbrake on the Jeep Compass, as well as the Renegade. First, get in the vehicle a…
How to enable and disable the parking assistance sensor on the Jeep Compass II
How to enable and disable the parking assistance sensor on the Jeep Compass II
Jeep Compass (2016-2025 / 552, MK 2) In this video we can see how to enable and disable the parking assistance sensor on a Jeep Compass II: on the central console we find a button with t…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2006-2016 - What does "SDW not working" mean on the Jeep Compass? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos