Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

Before starting, open the front bonnet of your Jeep Compass. Begin by disassembling and removing the front bumper by unscrewing the fastening screws and unclipping the support clips located around the perimeter of the bumper.

Next, unscrew and remove the bolts that secure the front headlight to the vehicle frame. This will free the front headlight.

At this point, extract the front headlight from its housing, then disconnect the electrical connector, completing the disassembly. To fit the new front headlight on your Jeep Compass, simply follow this procedure in reverse, and the replacement will be complete.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
How to Replace the Front Headlamp Bulb on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the front headlamp bulb on a Jeep Compass, open the bonnet to access the components inside the engine bay. Inside the headlamp, locate the…
How to Replace the Headlamp Bulbs on a Jeep Compass
How to Replace the Headlamp Bulbs on a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Follow these steps to replace the headlamp bulbs on a Jeep Compass: open the bonnet by pulling the lever located at the bottom right of the dashboard…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos