Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb of a Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a flathead screwdriver if needed to release the securing clips.

Then, rotate the bulb ninety degrees counter-clockwise. At this point, you can pull out and remove the bulb from the front headlight of your Jeep Compass, successfully completing the disassembly.

To fit the new bulb, simply follow these steps in reverse, and you will have completed the replacement.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Jeep Compass
How to Replace the Front Headlamp Bulb on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the front headlamp bulb on a Jeep Compass, loosen the screws securing the inner wheel arch cover near the bulb that needs replacing. Once …
How to Replace the Front Headlamp Bulb on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the front headlamp bulb on a Jeep Compass, open the bonnet to access the components inside the engine bay. Inside the headlamp, locate the…
Replacing the Front Headlight Bulb on a Jeep Compass
Replacing the Front Headlight Bulb on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today, you will learn how to remove and replace the front headlight bulb on a Jeep Compass. First, remove the screws from the wing on the affected si…

Other guides you may be interested in

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos