Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Headlight

Below are the instructions to remove and replace the front bumper and headlamp assembly of the Jeep Compass. First, you need to remove the front bumper to access the headlamp screws; unscrew the screws located at the top and bottom of the bumper, and remove the additional screws located on both sides of the front wheel arches, as shown in the video. At this point, gently unclip the bumper from the sides until it is completely removed; unscrew the headlamp assembly screws and disconnect the electrical connector of the bulbs, removing and replacing the headlamp!

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight on a Jeep Compass
How to Replace the Front Headlight on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before starting, open the front bonnet of your Jeep Compass. Begin by disassembling and removing the front bumper by unscrewing the fastening screws …
How to Remove the Front Headlight of a Jeep Compass
How to Remove the Front Headlight of a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Let's see how to remove the front headlight of a Jeep Compass. Open the bonnet (pull the bonnet release lever) and secure it. Remove the front headli…
How to Replace the Headlamp Bulbs on a Jeep Compass
How to Replace the Headlamp Bulbs on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Follow these steps to replace the headlamp bulbs on a Jeep Compass: open the bonnet by pulling the lever located at the bottom right of the dashboard…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos