Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spare Wheel from the Boot of the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Wheel

See other generations:
Video tutorial

In this video, find the spare wheel of the Jeep Compass: open the boot, lift the access cover using the load floor handle, then remove the fastening element that secures the spare wheel and take it out of the vehicle. The jack is located under the spare wheel; remove the alignment pin from the centre, turn the jack clockwise, and lift the foam tray, then take out the jack and the wheel bolt key. This procedure is certainly valid for vehicles from 2018 to 2020; for other production years, it is advisable to consult the owner's manual.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Replace the Wheel with the Spare on a Jeep Compass
How to Replace the Wheel with the Spare on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) These brief and simple instructions will show you how to remove and replace the wheel with the spare on a Jeep Compass. First, open the boot and lift…
Location and Diagram of the Fuse Boxes in the Jeep Compass 552
Location and Diagram of the Fuse Boxes in the Jeep Compass 552
Jeep Compass (2016-2025 / 552, MK 2) In this video, we will look at the arrangement of the fuse boxes in the Jeep Compass MP552: the engine bay fuse box is located on the left side of th…
How to Use the Tyre Repair Kit in the Jeep Compass?
How to Use the Tyre Repair Kit in the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) The Jeep Compass does not come with a spare wheel on board. Instead, it includes a tyre repair kit, which, although much easier to use than changing …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos