Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery in a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

See other generations:
Video tutorial

Below, we will discover the steps to remove and replace the battery in the key fob of the Jeep Compass. First, take the key fob in hand and start by extracting the physical key from inside it; then, pry open the fob along the seam to split it into two parts, as shown in the video.

At this point, you will have access to the electronic board and the battery, removing the latter; install the new battery, of the correct type (in this case, a CR 2032 3V), inserting it in the correct orientation. Finally, reinstall the physical key into the fob.


Posted on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Jeep Compass?
How to Replace the Remote Battery of the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the remote battery of the Jeep Compass, move the switch on the back of the remote to slide out the key and the chrome cover on the top of …
How to Replace the Remote Battery on a Jeep Compass
How to Replace the Remote Battery on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the remote battery on a Jeep Compass, activate the switch located on the back of the device so that the key and its cover can be extracted…
How to Replace the Key Fob Battery on a Jeep Compass?
How to Replace the Key Fob Battery on a Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To replace the key fob battery on a Jeep Compass, loosen the screw located just below the key. By loosening this screw, you can open the fob and acce…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos