Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on a Jeep Compass?

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Key

To replace the key fob battery on a Jeep Compass, loosen the screw located just below the key. By loosening this screw, you can open the fob and access the battery inside. The battery can then be extracted from its housing and replaced with a new spare part. Once the new battery is inserted into the device, close it by securing it with the screw. After installing the new battery, check that the fob is functioning.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on the Jeep Compass?
How to Replace the Remote Battery on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the battery in the remote for the Jeep Compass, lift the lever located on the back of the remote to extract the key from the top. Once thi…
How to Replace the Key Fob Battery of the Jeep Compass?
How to Replace the Key Fob Battery of the Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) To replace the key fob battery of the Jeep Compass, use a flathead screwdriver to lever inside the groove that forms between the two halves of the fo…
How to Replace the Battery in a Jeep Compass Remote Key?
How to Replace the Battery in a Jeep Compass Remote Key?
Jeep Compass (2016-2025 / 552, MK 2) To replace the battery in a Jeep Compass remote key, lower the switch located at the top of the remote so that the chrome part to which the emergency…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos