Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Fob Battery for the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

See other generations:
Video tutorial

This guide will show you how to disassemble and replace the battery in the key fob for the Jeep Compass. First, take the key fob and extract the physical key from inside it; then, use a flat tool to pry open the fob into two parts, accessing the electronic board and the battery, as shown in the video.

At this point, remove the old battery and replace it with a new one of the correct type and with the same code; reassemble the fob correctly and finally insert the key.


Posted on 22 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Jeep Compass?
How to Replace the Remote Battery of the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the remote battery of the Jeep Compass, move the switch on the back of the remote to slide out the key and the chrome cover on the top of …
How to Replace the Remote Battery on a Jeep Compass
How to Replace the Remote Battery on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the remote battery on a Jeep Compass, activate the switch located on the back of the device so that the key and its cover can be extracted…
How to Replace the Remote Battery on a Jeep Compass?
How to Replace the Remote Battery on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the remote battery on a Jeep Compass, move the switch located on the back of the device. This will allow you to remove the chrome cover fr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos