Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external handle of the front door of the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Handle

See other generations:
Video tutorial

The following steps will show us the procedure for disassembling and replacing the external handle of the front door of the Jeep Compass. First, we open the front door of the vehicle and begin to unscrew the small screw located on the side hole of the door, then removing the small rectangular piece of the lock cylinder; then we subsequently remove the entire handle, as shown in the video.

At this point, we install the new door handle, fixing it correctly; we reassemble the rectangular plastic cap and tighten the side screw!


Posted on 27 March 2025 by ScegliAuto


Related tutorials

How to Replace the Outer Handle on a Jeep Compass
How to Replace the Outer Handle on a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) To replace the outer handle on a Jeep Compass, you need to completely loosen the screws that secure the door panel to its housing: these are located …
Removing the External Wing Mirror on a Jeep Compass
Removing the External Wing Mirror on a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) This guide provides instructions for removing and replacing the external wing mirror on a Jeep Compass. First, open the front door of your car and st…
How to Remove the Door Panel (Right Side) on Jeep Compass
How to Remove the Door Panel (Right Side) on Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) To remove the door panel (front right) on a Jeep Compass: disconnect the battery terminals located in the engine compartment, use a screwdriver to un…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos