Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Wing Mirror on a Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Side mirror

This guide provides instructions for removing and replacing the external wing mirror on a Jeep Compass. First, open the front door of your car and start by removing the plastic cover located behind the door. Then, use a 10 mm socket spanner to undo the screws securing the wing mirror, allowing you to pull it off from the outside, as shown in the video. At this point, install the new wing mirror, connecting the electrical adjustment and securing it with its screws.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the External Rear View Mirror on a Jeep Compass 2007-2017
Removing the External Rear View Mirror on a Jeep Compass 2007-2017
Jeep Compass (2006-2016 / MK 1, MK 49) In this video, we will show you how to remove the external rear view mirror on a first-generation Jeep Compass, from 2007 to 2017. First, open the fr…
How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos