Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Rear View Mirror on a Jeep Compass 2007-2017

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Side mirror

In this video, we will show you how to remove the external rear view mirror on a first-generation Jeep Compass, from 2007 to 2017. First, open the front door and remove the plastic covers behind the mirror using a thin lever. Then, disconnect the electrical connector of the mirror and pull away the door seal to expose all the fastening screws to be unscrewed, as shown in the video. Once the screws are removed, you can slide the rear view mirror off from the outside along with its base; then reassemble everything!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the External Wing Mirror on a Jeep Compass
Removing the External Wing Mirror on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) This guide provides instructions for removing and replacing the external wing mirror on a Jeep Compass. First, open the front door of your car and st…
How to Activate the Automatic Folding and Unfolding of the Wing Mirrors on the Jeep Compass
How to Activate the Automatic Folding and Unfolding of the Wing Mirrors on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Follow these brief instructions to activate the automatic folding and unfolding of the external wing mirrors on the Jeep Compass. First, get inside t…
How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos