Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Door Handle on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Handle

Today, you will learn how to remove and replace the door handle on a third-generation Jeep Compass. First, open the front door on the affected side and remove the plastic side caps. Then, using a Torx screwdriver, remove the screw found inside and extract the first piece of the handle from the outside, using something thin to lever it out. At this point, remove the last piece of the handle by pulling and extracting it, as shown in the video. For replacing the other opening handles, proceed in exactly the same way; apply the reverse procedure for reassembly.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on the Jeep Compass?
How to Remove the Door Panel on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, see how to remove the driver's door panel on the Jeep Compass, a very simple task. First, open the door in question, then remove th…
How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos