Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Door trim panel

In this tutorial, see how to remove the driver's door panel on the Jeep Compass, a very simple task. First, open the door in question, then remove the small cover located inside the handle and unscrew the screw beneath it with a 7mm spanner. Repeat this for the opening handle, pull out the window switch console, and disconnect its connector. At this point, unscrew the remaining screws along the perimeter of the panel, grasp it, and fully disengage it from the door.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Jeep Compass?
How to Remove the Door Panel on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) To remove the door panel on a Jeep Compass, first loosen the screws located at the handle and near the window switch. Once these screws are loosened,…
Removing the Rear Door Panel of a Jeep Compass
Removing the Rear Door Panel of a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you will learn how to remove the door panel of a second-generation Jeep Compass in simple steps. First, open the rear door an…
How to open the locked fuel door of the Jeep Compass
How to open the locked fuel door of the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today we will discover the information that will allow us to open the blocked fuel door of the Jeep Compass, in simple steps. If we see that pressing…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos