Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel (Right Side) on Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Door trim panel

To remove the door panel (front right) on a Jeep Compass: disconnect the battery terminals located in the engine compartment, use a screwdriver to unscrew the screws in the upper door opening lever area and the screws in the handle (after removing the plastic screw covers). Remove the central covering plastic (where the handle is located), unscrew the remaining screws on the door panel, and detach the securing clips (disconnect the power wiring and the opening cable). Finally, pull off the panel by hand and detach it from the door.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the locked fuel door of the Jeep Compass
How to open the locked fuel door of the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today we will discover the information that will allow us to open the blocked fuel door of the Jeep Compass, in simple steps. If we see that pressing…
How to Remove the Door Panel on a Jeep Compass?
How to Remove the Door Panel on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) To remove the door panel on a Jeep Compass, first loosen the screws located at the handle and near the window switch. Once these screws are loosened,…
How to Remove the Door Panel on the Jeep Compass?
How to Remove the Door Panel on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, see how to remove the driver's door panel on the Jeep Compass, a very simple task. First, open the door in question, then remove th…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos