Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Jeep Compass?

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Door trim panel

To remove the door panel on a Jeep Compass, first loosen the screws located at the handle and near the window switch. Once these screws are loosened, use a screwdriver to pry off the speaker cover and the window switch knob. After removing these parts, you can detach the panel from the door to disconnect the underlying connectors. Once the old panel is removed, you can insert the new one, mounting and connecting it properly.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel of a Jeep Compass
Removing the Rear Door Panel of a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you will learn how to remove the door panel of a second-generation Jeep Compass in simple steps. First, open the rear door an…
How to Remove the Door Panel on the Jeep Compass?
How to Remove the Door Panel on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, see how to remove the driver's door panel on the Jeep Compass, a very simple task. First, open the door in question, then remove th…
How to Replace the Remote Battery on a Jeep Compass?
How to Replace the Remote Battery on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the remote battery on a Jeep Compass, move the switch located on the back of the device. This will allow you to remove the chrome cover fr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos