Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel of a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Door trim panel

In this video tutorial, you will learn how to remove the door panel of a second-generation Jeep Compass in simple steps. First, open the rear door and get something thin and pointed; then, remove the plastic covers on the grab handle and the opening handle, and unscrew the fixing screws found underneath. Next, unscrew all additional screws located on the sides of the panel and remove the window switch button by prying it out, then disconnect its electrical connector: now, you can remove the door panel!

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear door panel of the Jeep Compass
How to remove the rear door panel of the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this guide we will see the instructions that will allow us to disassemble the panel or the lining of the rear tailgate of the Jeep Compass. First,…
How to Remove the Door Panel on the Jeep Compass?
How to Remove the Door Panel on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, see how to remove the driver's door panel on the Jeep Compass, a very simple task. First, open the door in question, then remove th…
How to Remove the Door Panel on a Jeep Compass?
How to Remove the Door Panel on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) To remove the door panel on a Jeep Compass, first loosen the screws located at the handle and near the window switch. Once these screws are loosened,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos