Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Speakers on Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Speaker

Replacing the speakers on a Compass? Let's look at removing the panel covering the speaker. Disconnect the battery terminals located in the dedicated compartment. Remove the plastic grille covering the speaker, pulling it off the door panel with your hands. Unscrew the side screws of the speaker with a screwdriver. Detach the speaker and disconnect the power connectors. Take the new speaker and connect its terminals, secure it above the door and tighten the securing screws. At the end of the installation, test the operation of the new speakers.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Jeep Compass
Replacing Headlight Bulbs on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Need to replace damaged front headlight bulbs on a Jeep Compass? Here’s how to do it. Open the bonnet by pulling the lever located at the bottom righ…
Replacing the Front Headlight Bulbs on a Jeep Compass
Replacing the Front Headlight Bulbs on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Are your headlight bulbs blown? Here’s how to replace the front headlight bulbs on a Jeep Compass. Unscrew the plastic cover at the bottom of the bum…
Replacing the Rear Bulbs on Jeep Compass
Replacing the Rear Bulbs on Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the front headlight bulbs on a Jeep Compass and other Jeep models, start by lifting the boot lid. Now, using a flathead screwdriver, detac…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos