Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Rotate the Tyres on a Jeep Grand Cherokee AWD

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Wheel

See other generations:
Video tutorial

In this video, you will see how to rotate the tyres on the Jeep Grand Cherokee AWD: first, take the front wheels and swap them, meaning the passenger front goes to the driver rear and the driver front goes to the passenger rear. Then, place the passenger rear tyre on the passenger front and the driver rear on the driver front.

To lift the vehicle with the jack, find a solid point on the chassis, just underneath, as shown by the YouTuber, while the axle stands should be placed under the chassis rail, using a piece of wood to avoid damage.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

Where is the battery located in the Jeep Grand Cherokee?
Where is the battery located in the Jeep Grand Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) The Jeep Grand Cherokee, unlike other models in the same category, has the battery located in a different position. Specifically, the battery of the …
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, learn how to disassemble and replace the battery of the electronic key remote on a Jeep Cherokee and Grand Cherokee. First, take your …
How to Reset the Oil Change Light on the Jeep Grand Cherokee
How to Reset the Oil Change Light on the Jeep Grand Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) If the oil change warning message keeps appearing after each start of your Jeep Grand Cherokee, you need to perform a simple manual reset. This guide…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos