Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on the Jeep Grand Cherokee

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

If the oil change warning message keeps appearing after each start of your Jeep Grand Cherokee, you need to perform a simple manual reset. This guide outlines all the steps to follow.

First, ensure all doors are properly closed. Then, press the "Start" button twice to turn on the ignition without starting the engine.

At this point, repeatedly press the down arrow (located on the left side of the steering wheel) until you see the vehicle icon on the dashboard display. Once done, press and hold the right arrow button.

When prompted to hold "OK" to execute the reset, do so, and you are finished.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

Resetting the Oil Light in a 2022 Jeep Grand Cherokee
Resetting the Oil Light in a 2022 Jeep Grand Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In the 2022 Jeep Grand Cherokee, the oil light can be reset manually. After servicing your car, you can reset the light yourself, saving money that w…
Resetting the Service Light on the Jeep Grand Cherokee
Resetting the Service Light on the Jeep Grand Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) After replacing the engine oil in the Jeep Grand Cherokee, proceed to reset the control system, which displays a reminder on the dashboard to alert y…
How to Reset the Oil Change Light on a Jeep Cherokee
How to Reset the Oil Change Light on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Resetting the oil change light on a Jeep Cherokee is a routine operation that should be performed after every oil change and filter replacement. This…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos