Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Wheel on a Jeep Cherokee MK5 (2018)

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Wheel

In this brief and simple guide, follow step-by-step instructions to remove and replace the wheel with the spare on the Jeep Cherokee fifth generation. First, open the boot lid and start extracting all the necessary materials for the wheel replacement; then loosen the wheel bolts before lifting the vehicle with the jack, as shown in the video. At this point, replace the wheel with the spare, tightening all the bolts; finally, reposition the damaged wheel and all other tools in the boot!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Pads on a Jeep Cherokee
Replacing Brake Pads on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Are the brake pads due for replacement? Let's see how to remove them from the front brakes of a Jeep Cherokee. Lift the vehicle with a column lift (j…
How to Replace the Front Brake Pads on the Jeep Cherokee?
How to Replace the Front Brake Pads on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To replace the front brake pads on the Jeep Cherokee, lift the car with a jack so that the corresponding wheel is not in contact with the ground. Thi…
Replacing the Front Headlamp Bulb of the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Here’s how to replace the front headlamp bulb in a Jeep Cherokee. First, turn the corresponding front wheel inwards towards the headlamp where the bu…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos