Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Organising the Electrical System in the Engine Bay

Model: Jeep Cherokee MK 2, XJ - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Engine

See other generations:
Video tutorial

To organise the electrical system within the engine bay, good knowledge of general electronics is required, as well as the ability to read and interpret electrical diagrams. It is also important to have good manual dexterity with various tools to ensure that wires, connectors, terminals, etc., are connected properly.

With that said, gather all the new sockets and corresponding terminals, as well as rolls of wire of the correct gauge and conduit to collect and organise the wiring within the engine bay. Be patient when replacing all damaged wiring sections and their respective sockets, paying particular attention to the various connections and their insulation, using heat shrink tubing and/or insulating tape.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Location of the Fuse Box on the Jeep Cherokee
Location of the Fuse Box on the Jeep Cherokee
Jeep Cherokee (1984-2001 / MK 2, XJ) When looking for a solution to a malfunction of an electrical component in the Jeep Cherokee, it is important to know the location of the fuse boxes …
How to Disable Start&Stop on Jeep Cherokee
How to Disable Start&Stop on Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video tutorial, you will learn an effective method to permanently disable the start&stop system on a Jeep Cherokee from 2013 to 2020, as well…
Where is the TPMS Computer Located on a 2014/2018 Jeep Cherokee
Where is the TPMS Computer Located on a 2014/2018 Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) On this version of the Jeep Cherokee, the TPMS control unit is located on the roof of the cabin, mounted inside the tailgate, in the passenger compar…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos