Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Wheel on a Jeep Cherokee

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Steering wheel

In this video tutorial, you can see how to replace the steering wheel on a Jeep Cherokee. The first step is to prepare all the necessary tools: a 3/8 ratchet, an extension, a 16 mm socket, a 39/16 mm socket, another 7/8 socket, an 8 mm extension, and a steering wheel puller. To remove the old steering wheel, use a socket with an extension and an 8 mm nut. The next step is to remove the two screws. Now, disconnect the airbag, which is connected by two wires. Using the ratchet with a 16 mm socket, unscrew the central nut of the steering wheel. Now use the puller to remove the two screws of the steering wheel. At this point, install the new steering wheel by reversing the process.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel Airbag of a Jeep Cherokee
How to Remove the Steering Wheel Airbag of a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Before you can start, disconnect the vehicle's battery, then sit in the driver's seat of your Jeep Cherokee. Begin by unscrewing and removing the scr…
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, learn how to disassemble and replace the battery of the electronic key remote on a Jeep Cherokee and Grand Cherokee. First, take your …
Replacing the Timing Belt on a Jeep Cherokee
Replacing the Timing Belt on a Jeep Cherokee
Jeep Cherokee (2002-2007 / KJ, MK 3) Prepare to replace the timing belt on a Jeep Cherokee. Lift the front bonnet to access the engine and the panel covering it. Once these operations ar…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos