Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the wheel with the spare one on the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Checks and maintenance

These short and simple instructions will show us how to disassemble and replace the wheel with the spare one on the Jeep Compass. First, we open the rear tailgate of the trunk and start lifting the trunk floor to remove the spare wheel and extract the entire wheel replacement kit; then we lift the car by placing the jack on the appropriate area, then unscrew the wheel bolts to remove it, as shown in the video. At this point, we install the spare wheel, tightening the bolts in a crisscross pattern; finally, we reposition the wheel in the appropriate compartment, along with all the other tools.

Posted on 14 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spare Wheel from the Boot of the Jeep Compass
How to Remove the Spare Wheel from the Boot of the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video, find the spare wheel of the Jeep Compass: open the boot, lift the access cover using the load floor handle, then remove the fastening …
How to Use the Tyre Repair Kit in the Jeep Compass?
How to Use the Tyre Repair Kit in the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) The Jeep Compass does not come with a spare wheel on board. Instead, it includes a tyre repair kit, which, although much easier to use than changing …
Changing Tyres on Jeep Compass
Changing Tyres on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Open the boot and remove the lower cover, as shown in the video. Underneath, you will find a jack: unscrew the fastener and take it out. Removing and…

    Frequently Asked Questions

    • Compass 2006-2016 - What does "SDW not working" mean on the Jeep Compass? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos