Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Brake pads

See other generations:
Video tutorial

In this video, we will see how to change the brake pads on a 2017 Jeep Compass. The video will show us how to replace them on one wheel, as the procedure is the same for the other side.

First, remove the wheel so you can work directly on the part of interest. From here, unscrew the piston to remove the old pads that need replacing.

Take the new pads and reposition them where the old ones were, ensuring to respect the position of the shim on each pad. At this point, reattach the piston secured with the bolt and then also refit the wheel.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Brake Pad Replacement on Jeep Compass
Brake Pad Replacement on Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Replace the brake pads on the Jeep Compass. Lift the vehicle and remove the wheel on the side where you need to replace the brake pads. Unscrew the c…
Replacing the Front Brake Pads on the Jeep Compass MK1
Replacing the Front Brake Pads on the Jeep Compass MK1
Jeep Compass (2006-2016 / MK 49, MK 1) In this guide, you will find step-by-step instructions to remove and replace the front brake pads on the first series Jeep Compass. First, lift the v…
How to Temporarily Disable the Handbrake on a Jeep Compass to Replace the Brake Pads?
How to Temporarily Disable the Handbrake on a Jeep Compass to Replace the Brake Pads?
Jeep Compass (2016-2025 / 552, MK 2) This short tutorial shows how to temporarily disable the handbrake on a Jeep Compass to replace the rear brake pads. This procedure will put the car …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos